Concrete cutting in Brownsville TX - clean cuts right where you need them
Need a trench for a drain line, a doorway through a wall or a broken section out? We plan each cut before the saw starts.
- Fully licensed and insured.
- Free estimates at your property.
- Replies within 1 business day.
When do you need concrete cut, and what goes into it?
Concrete cutting in Brownsville uses saws and core drills to make straight cuts, openings and round holes in slabs and walls, so you can run a pipe, add a doorway or take out a broken section without tearing up more concrete than you have to.
Most people call us because something new has to go where concrete already is, like a drain line under the patio, a door through a wall, or a broken stretch of driveway that has to come out before a new section goes in. The price moves with the length and depth of the cut, how much steel is inside, whether it's a slab or a wall, whether it's indoors or out, and whether we're also breaking out and hauling the pieces. The schedule turns on whether the slab needs a scan first and what the city wants to see, and the estimate puts your scope in writing so you know what's in and what isn't. We're based in Brownsville and work in the cities around it.
How do you know it's time to cut concrete?
One panel broken up
You see one section of driveway or patio cracked and sunken while the rest still sits flat. That piece can usually be cut out along straight lines and replaced on its own, but if you leave it, water works into the cracks and the damage spreads into panels that are still sound.
A new pipe has to cross
A remodel or a plumbing fix needs a drain or line to run under or through the slab. That usually means a trench cut or a round hole drilled clean through, and until it's done, the rest of the project sits waiting on the concrete.
A wall in the way
You want a doorway, a window or a vent through a concrete wall. A saw makes that opening with straight edges, while knocking it out by hand tends to crack the wall well past where you meant to stop.
How we handle concrete cutting, start to finish
Before we cut, I pick the saw that fits the spot and the size of the cut, because a driveway slab, a concrete wall and a tight corner each call for a different tool. Then we check whether anything inside needs finding first, like rebar, the steel bars that hold a slab together, post-tension cables, which are steel strands pulled tight inside some slabs, or pipe and conduit, and on a structural floor or wall that can mean a scan before the saw starts. Who handles the slurry and whether we're also hauling the pieces get settled up front too, and the questions below go into both. On cutting day our crew marks the lines, makes the cut and cleans up the work area.
Most cuts lead to new concrete. Cutting out a broken section usually comes right before concrete driveway building on the part we replace, and a trench across the back of the house often turns into new concrete patio construction when you're adding on anyway.
Flat sawing for slabs
A flat saw rolls along the top of a slab to make long straight cuts in driveways, patios and floors. It's the usual pick when the cut is on the ground and the saw has room to move.
Wall sawing for vertical cuts
A wall saw runs on a track bolted to the wall, so it cuts vertical or steep surfaces straight for doorways and openings. Very thick or heavily reinforced sections can call for a wire saw instead, which pulls a cutting cable through the concrete.
Hand sawing for tight spots
A hand saw reaches corners, small openings and spots a bigger machine can't get into. It suits short cuts near walls, steps and edges.
Core drilling for round holes
A core drill bores a clean round hole for a pipe, drain or conduit to pass through a slab or wall. It's the right call when you need a hole and not a long cut.
Get a written scope for your concrete cut
We reply within one business day to set up a time. I come out, look at the cut and write up a free estimate at your property, with no pressure to book.
(956) 505-5331- Based in
- Brownsville, TX 78520
- Hours
- Mon–Sun: 7 AM–10 PM
What happens after you call us about a cut?
From your first call to the walk-through at the end, here's how a cutting job runs with us and who you'll be talking to along the way.
Call or send the form
Call (956) 505-5331 or use the form, and we set up a time to come look. Tell us where the cut goes and what it's for, so I show up ready.
I look and write it up
I come out, look at the slab or wall, ask what the opening is for and write up the estimate. It spells out the saw, any scan, the slurry plan and whether hauling is in, so you can compare it line by line with anyone else's.
We line up the cut
Once you say go, we take care of the permit steps for our part and our crew comes out with an experienced lead to run the cut. Federal safety rules call for walk-behind saws that feed water to the blade the whole time, so expect a wet work area.
Walk the finished cut together
When the cut's done and the area's cleaned up, we walk it with you. If pieces were coming out, you see the opening clean and ready for whatever goes in next.
Why Brownsville homeowners call Elite Brownsville Concrete Construction for cutting
Planning first, since 2017
I learned on commercial crews to plan a job before anyone starts the equipment, and I've run this business that way since 2017. On a cut, that means the saw, the scan and the slurry are settled before cutting day, not figured out in your driveway.
I write your estimate myself
I come out to look at the job and write the estimate, so the person answering your questions is the one planning the cut. That way nothing about your job gets lost between the visit and the day we show up.
Our crew keeps slurry contained
Our own crew does the work, with an experienced lead running each cut and keeping the slurry out of the gutter. That matters here, because the city says anything that gets into a storm drain goes untreated into the water used for swimming, fishing and drinking.
Fully licensed and insured
We're fully licensed and insured. A saw working next to your house, your pipes and your driveway is no job to hand to someone who isn't.
If you've got a cut in mind, send us the details or call (956) 505-5331 and I'll come take a look.
Concrete cutting, permits and street-side work in Brownsville
In Brownsville, the city's Building Permits and Inspections Division processes permits and reviews plans for remodeling and new construction, so a cut that's part of a remodel, like a new doorway or a plumbing change, goes through them. Whether a cut on its own needs a permit isn't something I'll assume either way, so we ask the division. Before work starts we check which city or county office covers your address, help with the permit steps for our part of the job and get inspections on the calendar with you.
Cuts near the street bring in another office. The city's Real Estate & Right-of-Way branch issues permits for driveway access and construction that may affect city property, so when a cut reaches the curb or the strip along the street, we check with them first. We get plenty of calls where an old driveway meets the street, and we take the same care on jobs in San Benito and Harlingen.
Questions about concrete cutting in Brownsville
How much does concrete cutting cost per foot in Brownsville?
Across the US, professional saw cutting of accessible 4- to 6-inch concrete slabs usually runs about $4 to $10 per linear foot. That's a national figure for the sawing alone, so reinforced or deeper slabs usually cost more per foot, wall sawing runs higher again, and on a small job a minimum charge may set the price more than the per-foot rate. We price your own cut at the estimate.
Does a concrete cutting quote include hauling the concrete away?
Not always, because sawing and removal are separate jobs and some cutters make the lines and leave the pieces in place. Breaking, lifting, hauling and disposal can cost more than the sawing itself, so compare quotes on what each one includes. Ours says in writing whether we're cutting only or taking the pieces away too.
Who handles the water, power and slurry when concrete is cut?
It should be agreed before the saw starts, and one industry specification for cutting work has the owner supply water and electricity and says slurry collection and disposal must be planned with the owner ahead of time. Slurry is the gray mix of water and concrete dust the blade throws off. We go over all three at the estimate, so you know whether we need your outdoor faucet and an outlet and where the slurry goes.
Does cutting concrete indoors cost more?
Usually it does, because an indoor cut can call for water control, slurry recovery, ventilation, barriers or dust extraction that an outdoor cut doesn't need. If the cut is inside, like a garage floor or a slab under a remodel, tell us when you call so the estimate covers that setup.
What is the best way to remove part of a concrete slab without cracking the rest?
Saw cut the edges first, then break out only what's inside the lines. A clean saw cut gives the break a place to stop, where hammering on its own can crack past where you meant to. Concrete can still crack later for reasons that have nothing to do with the cut, and I'd rather tell you that plainly than sell you a promise.
How long does concrete cutting take?
The sawing is usually the shortest part of the job, and most of the time goes into what comes before and after it. A scan if the slab needs one, any permit review, and breaking out and hauling if that's in your scope all add time, so I'll tell you at the estimate what your schedule turns on.
Related concrete work after a cut
Concrete driveway building
When a broken section comes out, the gap needs a new slab on a packed base, poured so water runs away from your house.
Concrete patio construction
Cutting back an old patio or patching a trench is a good time to plan a new patio that fits the yard and drains right.
Service areas for concrete cutting around Brownsville
Elite Brownsville Concrete Construction is based in Brownsville, TX, and does concrete cutting in the cities around it, including San Benito and Harlingen. The 9 cities below each have their own page, and if yours isn't listed, call and ask.
Brownsville, TX
Send your cut details for an estimate
A few photos, a rough length and how thick the slab or wall is let me bring the right questions to the visit.