Concrete Pool Decks in Brownsville TX - a deck that drains and holds up in the heat
Cracked, worn or slick concrete around your pool? We resurface what can be saved and pour new decks timed around the heat.
- Fully licensed and insured.
- Free estimates at your property.
- Replies within 1 business day.
Should you resurface your pool deck or pour a new one?
A concrete pool deck is the concrete around your swimming pool, and in Brownsville we either put a new surface on a worn deck that's still sound or pour a new deck that drains away from the water and holds up to summer heat.
Most calls start with an old deck that's cracked, chipping or tipping, or with a new pool that needs concrete around it. The price turns on how big the deck is, whether the old slab has to be broken out and hauled off, how much steel goes in and the finish you pick, from a plain broom texture to decorative concrete with color or pattern. The schedule turns mostly on the weather, because we pour when conditions suit fresh concrete, not when the calendar says so. Your estimate puts the scope in writing, so you can see what's in and what isn't before you decide.
How do you know your pool deck needs work?
Cracks running across the deck
Long cracks that keep widening, or new ones branching off, usually mean the slab moved or was never given joints to crack along. Water gets into them and edges start breaking off under bare feet, so a deck that might have taken a new surface can end up needing to come out.
Chipping or flaking on top
When the top turns rough, dusty or flaky but the slab underneath stays solid, the surface is usually what failed, often from a pour in the heat of the day. That kind of deck may still be a good candidate for resurfacing, as long as the wear hasn't worked its way deeper.
Slabs tipping toward the pool
Sections that sink, tip or leave water standing usually mean the ground under them settled because it was raked level instead of dug out and packed. A new coat won't level a slab that's still moving, and standing water keeps working at the joints and edges while you wait.
How we resurface and build concrete pool decks
With a worn deck, I look first at whether the old concrete is sound enough to resurface or whether it should come out, because a fresh surface over a moving slab only buys time. On a new deck, we dig out and pack the subgrade, the ground the slab sits on, then set forms so the deck sheds water away from the pool and the house. We lay rebar, steel that holds the slab together if it cracks, and plan where the control joints go, the grooves we cut so the concrete cracks along a line we chose instead of across the middle. We pour when the weather suits it, give it a broom finish, a light texture that gives wet feet some grip, and keep it from drying out too fast while it cures, the wait before it's ready to use, so the top comes out strong. We also talk through sealers before the pour, because some get slick around the water. If the budget's tight, the base is the last place I'd cut, since nobody sees it on day one and it decides whether the deck settles with the dirt.
Pool jobs rarely stop at the deck. Where the deck meets a patio door or a raised part of the yard, we build concrete steps on the same schedule so the rise and the deck surface line up. If you're adding a pool house or a cabana, our crew can pour its slab foundation while we plan the deck, so both slabs sit right next to each other.
Resurface the deck you have
This suits a deck that's solid and level but worn or stained on top. A new coating goes over the old slab, so there's no tear-out, but it only works if what's underneath isn't moving.
Tear out and pour new
This suits a deck that's sinking, broken through or draining toward the house, and every new pool. We start from the ground up, so the base, slope, joints and steel are all done our way.
Broom finish or decorative
A broom finish is the plain, grippy choice most families pick around water. Color or pattern dresses the deck up, and we'll talk through how much grip you trade for the look before you choose.
Get a written estimate for your pool deck
We reply within one business day to set up a time. I come out, look at your deck and write a free estimate with the scope spelled out, and there's no pressure to book.
(956) 505-5331- Based in
- Brownsville, TX 78520
- Hours
- Mon–Sun: 7 AM–10 PM
What happens when you call about a pool deck in Brownsville?
Here's how a pool deck job runs with us, from your first call to walking the finished concrete together.
Call or send a message
Call or use the form, and we get back to you to set a time for me to come out. Tell us whether it's an old deck or a new pool, so I know what to look for.
I come out and look
I walk the site, look at what's there now and ask how you use the pool, then write an estimate that spells out what's included. You see exactly what you're paying for before you decide anything.
We prep and pour it
Once you say go, we line up the permit steps, prep the ground and pour when the weather suits fresh concrete. If the day turns too hot or windy, we'd rather move the pour than fight it.
We walk the finished deck
When the work's done, we walk the deck with you and go over everything we did. We'll also tell you when it's ready for bare feet and when the pool furniture can go back.
Why Brownsville homeowners call us for pool decks
I write your estimate myself
I come out myself to look at your deck and write the estimate, and I've run this business since 2017. You're talking with the person who plans your pour, not someone passing notes along.
A crew used to summer pours
Our own crew does the work, with an experienced lead on site to run each pour, summer ones around Brownsville included. That matters, because the worst hot-weather problems with fresh concrete come from crews new to summer pours or to this kind of work, so it's fair to ask any bidder about theirs.
Insured crew, satisfaction guarantee
We're fully licensed and insured, so you're not carrying the risk while our crew works around your pool. The job is backed by our satisfaction guarantee.
If your deck's wearing out or a pool's on the way, send us the details or call (956) 505-5331, and I'll come out to take a look.
Pool decks, steps and permits in Brownsville
In Brownsville, the city's Building Permits and Inspections Division processes permits and reviews plans for all remodeling and new construction, and that's the office to ask whether your pool deck needs a permit. Before the work starts, we check which city or county office covers your address, help with the permit steps for our part of the job and put inspections on the calendar with you. If something's unclear, we ask the office instead of guessing.
A lot of the pool deck calls we get around Brownsville are decks that have been sealed and resealed until they're glossy and slick, or decks that drain toward the house instead of away from it. We check the slope and the surface before deciding anything, the same way we do on jobs in Los Fresnos and Port Isabel.
Concrete pool deck questions in Brownsville
How much does a concrete pool deck cost in Brownsville?
Across the US, installing a concrete pool deck usually costs about $10.50 to $12 per square foot, so treat that as the market's range, not our Brownsville price. What moves it is the deck's size, whether an old slab has to be broken out and hauled off, and the finish you choose. Your estimate puts our number for your deck in writing, along with what's included.
Can my old pool deck be resurfaced instead of replaced?
Often it can, if the concrete underneath is still sound. Resurfacing lays a new concrete coating over the existing deck, and it's the cost-effective route when the old slab is a good candidate. I'll tell you which way your deck leans when I come out to look at it.
When is the best time to pour a concrete pool deck?
Pour when the weather is favorable, which in summer often means a cooler time of day or night instead of midday. Hot-weather trouble can show up any time of year but mostly hits in summer, when fresh concrete sets faster, is harder to finish and is more likely to crack as it dries and cools, and wind makes high heat and low humidity even harder on it. We schedule the pour around those conditions, so ask us when your slab will go in.
How do I keep a new pool deck from cracking?
Nobody can honestly promise concrete won't crack, but you can keep cracks small and spaced out. That comes down to three things: joints placed right and cut on time, reinforcing steel in the slab, and keeping the concrete's temperature within practical limits. Ask each bidder where the joints will go and how the slab will be reinforced, and I'll walk you through ours at the estimate.
Will sealing my pool deck make it slippery?
It can, according to one trade article where an expert said sealing concrete around pools makes it more slippery. The same article says acrylic sealers last about 1 to 3 years depending on the product and are meant to be reapplied, so a sealed deck means resealing over time. If you want a sealer, ask how slick the sealed deck will be, and we'll go over that before anything goes on.
Does a home pool deck have to meet Texas public pool rules?
No, the state's public pool rules leave out residential pools, so a home deck falls under the city's codes instead. In Brownsville, the city enforces its building and zoning codes on houses through plan review and construction inspection.
Related concrete work around the pool
Concrete steps construction
Getting from the house down to the pool is safer on solid, even steps, and wet feet notice an uneven rise or a crumbling edge right away.
Slab foundation building
If a structure is going up beside the pool, its floor has to carry walls and a roof, which calls for a foundation slab, not a deck.
Cities we serve for pool deck work
Elite Brownsville Concrete Construction is based in Brownsville, TX, and builds pool decks across the cities around it, including San Benito and Cameron Park. Nine cities have their own page below, and if yours isn't one of them, call and ask.
Brownsville, TX
Get your pool deck looked at
Have the deck's rough square footage and a few photos of the surface ready, and the first call goes faster.